BXWXY - 8XX INDUSTRIAL HIGH GLOSS ENAMEL, 800D
- MSDS: BXWXY
- Manufacturer: AMERITONE PAINT CORP
- Product Name: 8XX INDUSTRIAL HIGH GLOSS ENAMEL, 800D
- National Stock Number: 8010-00N048791
Product Identification
Product ID:8XX INDUSTRIAL HIGH GLOSS ENAMEL, 800D
MSDS Date:07/01/1993
FSC:8010
NIIN:00N048791
MSDS Number: BXWXY
Responsible Party
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 310-639-6791
Cage: FO133
Contractor
Telephone: 310-639-6791
Cage: FO133
Ingredients
ALKYD RESIN
Fraction By Weight: 40%
OSHA PEL N/K
ACGIH TLV: N/K
SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MINERAL
CAS: 64742-88-7
Fraction By Weight: 35%
OSHA PEL N/K
ACGIH TLV: N/K
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 10-15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
LINSEED OIL; (RAW LINSEED OIL)
CAS: 8001-26-1
RTECS: OI9690000
Fraction By Weight: <5%
OSHA PEL N/K
ACGIH TLV: N/K
CLAY (KAOLIN); (ALUMINUM SILICATE)
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST
419.4 LBS/GAL
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
CLOSED CONTAINER UNTIL PROPERLY DISPOSED OF.
RTECS: 9999999ZZ
OVERSPRAY & SANDING DUST. WHEN USED IN
RTECS: 9999999ZZ
DESIGNED TO REMOVE COMBINATION OF PARTICULATES & VAP.
RTECS: 9999999ZZ
AIR SUPPLY RESP OR HOODS. USE NIOSH/MSHA APPRVD
RTECS: 9999999ZZ
MATL COATED W/THIS PRODUCT. FOLLOW RESP MFR'S
RTECS: 9999999ZZ
BELOW CURRENT APPLIC SFTY & HLTH STDS IN MIXING,
RTECS: 9999999ZZ
DRIED COATING & DECOMP PRODUCT DURING WELDING &
RTECS: 9999999ZZ
Fire Fighting
Flash Point Method:SCC
Flash Point:102F,39C
Lower Limits:SEE ING 2
Extinguishing Media:IN CASE OF FIRE, USE CARBON DIOXIDE, DRY CHEMICAL,
FOAM OR OTHER NFPA APPROVED METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
SUMMON PROFESSIONAL FIREFIGHTERS. WATER SPRAY MAY BE INEFTIVE. IF
WATER IS USED, FOG NOZZS ARE PREF. (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT & FLAME. DUE TO PRESS BUILDUP, CLSD CNTNRS EXPOS TO EXTREME
HEAT MAY EXPLODE. NEVER USE WELDING OR CUTTING (SUPDAT)
Exposure Controls
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>310F,>154C
Vapor Pres:SEE ING 2
Vapor Density:HVR/AIR
Spec Gravity:1.030
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:53.6
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.